That would be one way to do it. The other would be to wire the pot as
described, then from its wiper, run two 100k resistors, one to pin 13 and
one to pin 6 of IC 1
Ken
Ken Stone sasami@... or sasami@...
Modular Synth PCBs for sale <http://www.blaze.net.au/~sasami/synth/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>
described, then from its wiper, run two 100k resistors, one to pin 13 and
one to pin 6 of IC 1
Ken
>Hi._______________________________________________________________________
>
>I want to add a front panel pot in addition to the CV input. Has
>anyone tried this? My first idea was to use a CGS04 mixer, with a
>Pot wired as a voltage divider between GND and +15V as one of
>the inputs, the existing CV input as another, and the mixer's
>output directly connected to the CGS37 CV input. Would it be that
>simple, or is there a risk of stability problems?
>
>cheers,
>
>Dave
>
>
>
>
>
>
>The CGS Modular Synth home page: http://www.cgs.synth.net/
>
>Yahoo! Groups Links
>
>
>
>
>
>
>
Ken Stone sasami@... or sasami@...
Modular Synth PCBs for sale <http://www.blaze.net.au/~sasami/synth/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>