Speaking of which,
I'd like to order two gate sequencer pcb
sets. Time to replace the two clunky ones in my system.
Romeo
----- Original Message -----From: sasami@...Sent: Sunday, October 14, 2001 5:56 PMSubject: [cgs_synth] Gate sequencer modificationMy gate sequencer prototype tends to start off with two outputs high when
first powered. Sending a reset signal cures this, so it isn't really a
concern. Automatic resetting on power up can be achieved by soldering a 100n
capacitor between the switched contact of the Disable jack and +15 Volts.
Ken
_______________________________________________________________________
Ken Stone sasami@...
Modular Synth PCBs for sale <http://www.blaze.net.au/~sasami/synth/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>
Catgirl Paradise <http://www.anime.net/~kens/>
See the following URLS for the CGS Modular Synth home page:
http://198.164.142.50/~cgs/
http://shokbox.obscure.ca/~cgs/
To unsubscribe from this group, send an email to:
cgs_synth-unsubscribe@yahoogroups.com
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.