Up adn down use two different circuits. In down mode "preset" is used to set
the sequencer to the last position. Check the circuitry around pin 1 of the
counter - there is a transistor inverter and a diode involved.
Ken
Ken Stone sasami@... or sasami@...
Modular Synth PCBs for sale <http://www.blaze.net.au/~sasami/synth/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>
the sequencer to the last position. Check the circuitry around pin 1 of the
counter - there is a transistor inverter and a diode involved.
Ken
>Alright, my Burst Generator is now in order, I finished the Sequential_______________________________________________________________________
>Switch today, everything works but the reset switch and push button
>have no effect when running in the backwards (down) position... Any
>ideas???
>
>Thanks
>Chris
>
>
>
>
>
>
>
>
>
>The CGS Modular Synth home page: http://www.cgs.synth.net/
>
>Yahoo! Groups Links
>
>
>
>
>
>
>
>
Ken Stone sasami@... or sasami@...
Modular Synth PCBs for sale <http://www.blaze.net.au/~sasami/synth/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>