Yahoo Groups archive
Thread
2006-05-28 by thealisonproject
2006-05-29 by sasami@hotkey.net.au
>Alright, my Burst Generator is now in order, I finished the Sequential_______________________________________________________________________
>Switch today, everything works but the reset switch and push button
>have no effect when running in the backwards (down) position... Any
>ideas???
>
>Thanks
>Chris
>
>
>
>
>
>
>
>
>
>The CGS Modular Synth home page: http://www.cgs.synth.net/
>
>Yahoo! Groups Links
>
>
>
>
>
>
>
>
2006-05-29 by The Alison Project
----- Original Message -----
From: <sasami@...>
To: <cgs_synth@yahoogroups.com>
Sent: Sunday, May 28, 2006 10:46 PM
Subject: Re: [cgs_synth] Seq Switch Reset Problem
> Up adn down use two different circuits. In down mode "preset" is used to
> set
> the sequencer to the last position. Check the circuitry around pin 1 of
> the
> counter - there is a transistor inverter and a diode involved.
>
> Ken
>
>>Alright, my Burst Generator is now in order, I finished the Sequential
>>Switch today, everything works but the reset switch and push button
>>have no effect when running in the backwards (down) position... Any
>>ideas???
>>
>>Thanks
>>Chris
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>The CGS Modular Synth home page: http://www.cgs.synth.net/
>>
>>Yahoo! Groups Links
>>
>>
>>
>>
>>
>>
>>
>>
> _______________________________________________________________________
> Ken Stone sasami@... or sasami@...
> Modular Synth PCBs for sale <http://www.blaze.net.au/~sasami/synth/>
> Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>
>
>
>
>
> The CGS Modular Synth home page: http://www.cgs.synth.net/
>
> Yahoo! Groups Links
>
>
>
>
>
>
>