hey thanks alot ken - allmost have it finished up. i was just rereading the pages and it
mentions not installing the 47k and 100k resistors on the buffer boards... is that just for
the dual/connected bufferboard? since i have a total of 4 do i take them out of all of them
except one or just the connected one? my brain hurts today i'm sorry! also i am short one
4081 and am going to see if a 4093 works - if not gota wait till monday... thanks again!
dave
mentions not installing the 47k and 100k resistors on the buffer boards... is that just for
the dual/connected bufferboard? since i have a total of 4 do i take them out of all of them
except one or just the connected one? my brain hurts today i'm sorry! also i am short one
4081 and am going to see if a 4093 works - if not gota wait till monday... thanks again!
dave
--- In cgs_synth@yahoogroups.com, sasami@... wrote:
>
> Just pretend all the outputs on the preset board are labelled "F1" to "F8"
> or "P1" to "P8" depending ont he type of output you want, then wire them to
> the corresponding F or P inputs on the buffers.
>
>
>
> >hey everyone - been working on a giant gate sequencer/drum machine project.
> >so i've gotten everything working - have the preset board working as 4
> outs. but
> >looking at the schematics and looking at the preset board pcb my mind hurts!
> >do i need to cut traces and reconfigure the board if i want to use it as 8
> individual
> >out on/off triggers? i have the buffer boards etc... but maybe someone can just
> >say yes dave you need to - then i'll do it :)
> >
> >any words on encouragement or tips welcome thanks
> >
> >dave wright
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >The CGS Modular Synth home page: http://www.cgs.synth.net/
> >
> >Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
> >
> _______________________________________________________________________
> Ken Stone sasami@... or sasami@...
> Modular Synth PCBs for sale <http://www.blaze.net.au/~sasami/synth/>
> Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>
>