hi
i assume you have seen Ken's page describing this module at
http://www.cgs.synth.net/
its best to view this PCB as 3 modules on one board-
if i wanted to wire the folder directly into the multiplier, i would
run a wire from the switch of the folder's output jack to the switch
of the multipliers input jack.
this way you can still use the modules individually.
hope this helps
andrew
i assume you have seen Ken's page describing this module at
http://www.cgs.synth.net/
its best to view this PCB as 3 modules on one board-
if i wanted to wire the folder directly into the multiplier, i would
run a wire from the switch of the folder's output jack to the switch
of the multipliers input jack.
this way you can still use the modules individually.
hope this helps
andrew
--- In cgs_synth@yahoogroups.com, wasubot <wasubot@...> wrote:
>
> Hi,
>
> Could someone please direct me to information on how to wire the
folder
> directly to the multiplier? I'm very new to electronics so
schematics are
> tricky for me to decode. Thanks kindly.
>
> --
> Wasubot
> ----------------------------
> Notes: Special Sequence Mixed For Dancing
>
>
> [Non-text portions of this message have been removed]
>