Synth-DIY Yahoo! Groups Archives

folder to wave multiplier

2006-06-28 by wasubot

Hi,

Could someone please direct me to information on how to wire the folder
directly to the multiplier? I'm very new to electronics so schematics are
tricky for me to decode. Thanks kindly.

--
Wasubot
----------------------------
Notes: Special Sequence Mixed For Dancing

[Non-text portions of this message have been removed]

Re: folder to wave multiplier

2006-06-29 by bbluthang

hi
i assume you have seen Ken's page describing this module at
http://www.cgs.synth.net/

its best to view this PCB as 3 modules on one board-
if i wanted to wire the folder directly into the multiplier, i would
run a wire from the switch of the folder's output jack to the switch
of the multipliers input jack.
this way you can still use the modules individually.
hope this helps
andrew

Show quoted textHide quoted text

--- In cgs_synth@yahoogroups.com, wasubot <wasubot@...> wrote:
>
> Hi,
>
> Could someone please direct me to information on how to wire the
folder
> directly to the multiplier? I'm very new to electronics so
schematics are
> tricky for me to decode. Thanks kindly.
>
> --
> Wasubot
> ----------------------------
> Notes: Special Sequence Mixed For Dancing
>
>
> [Non-text portions of this message have been removed]
>

Cgs synth

folder to wave multiplier

folder to wave multiplier

Re: folder to wave multiplier

Move to quarantaine