Hello again group,
Sorry to keep hassling you that aren't interested in this (and for cross-posting!) I meet w/
my web guy tomorrow and hopefully go live w/ the site this weekend. Meanwhile...
There are five silkscreens ready, listed below. 1U are $20, 2U are $25 and 3U are $30.
Please keep in mind that these panels are about 1/64" too small, and you may need to file
the mounting holes a tiny bit if using rails! I'll supply mounting screws to atone for this
hassle :)
All are MOTM format for now. DotCom in a couple months. 25 new CGS designs in a
couple months. Much fun. Cabinets soon. Oakley and Tellun in a couple months. Panels
are shippable worldwide (not treated w/ bad chrome).
1U Optic CV Processor: uses CGS mixer board. Schematic to be on site soon. Mixer is
wired as three reversible attenuators. Optic cell goes on top (use an LED bezel for
mounting). Controls are +/-Offset, +/-CV1/optic, +/-CV 2. Jacks are CV1 (normalled to
optic cell), CV2, CV3 (unattenuated, usually for 1v/oct), Output.
2U Cynare: includes switches for each filter response, and two optic cells selectable via
switch: 1/off/2. These affect the 'shimmer'.
2U Utility LFOs
2U BiNTic Filter: uses a modified Mixer, or Tellun's MUUB-2 PCB, to get square and saw
waves from the oscillator. No linear FM. I may do a BiNTic Expander on the next run, which
will include linear FM, PWM on the VCO, and VC Res using my VR Resistor PCB.
3U Wave Multipliers: includes a ring mod, unspecified -- a 4030 MS-20 style on the proto
section of the PCB? A passive real one from Ken Stone? You choose.
So there you go. Readymades will be ready once they're all tested, in stock, photo'd, and
sound sampled -- a week or two. Kits shortly after.
Cheers,
Scott
Sorry to keep hassling you that aren't interested in this (and for cross-posting!) I meet w/
my web guy tomorrow and hopefully go live w/ the site this weekend. Meanwhile...
There are five silkscreens ready, listed below. 1U are $20, 2U are $25 and 3U are $30.
Please keep in mind that these panels are about 1/64" too small, and you may need to file
the mounting holes a tiny bit if using rails! I'll supply mounting screws to atone for this
hassle :)
All are MOTM format for now. DotCom in a couple months. 25 new CGS designs in a
couple months. Much fun. Cabinets soon. Oakley and Tellun in a couple months. Panels
are shippable worldwide (not treated w/ bad chrome).
1U Optic CV Processor: uses CGS mixer board. Schematic to be on site soon. Mixer is
wired as three reversible attenuators. Optic cell goes on top (use an LED bezel for
mounting). Controls are +/-Offset, +/-CV1/optic, +/-CV 2. Jacks are CV1 (normalled to
optic cell), CV2, CV3 (unattenuated, usually for 1v/oct), Output.
2U Cynare: includes switches for each filter response, and two optic cells selectable via
switch: 1/off/2. These affect the 'shimmer'.
2U Utility LFOs
2U BiNTic Filter: uses a modified Mixer, or Tellun's MUUB-2 PCB, to get square and saw
waves from the oscillator. No linear FM. I may do a BiNTic Expander on the next run, which
will include linear FM, PWM on the VCO, and VC Res using my VR Resistor PCB.
3U Wave Multipliers: includes a ring mod, unspecified -- a 4030 MS-20 style on the proto
section of the PCB? A passive real one from Ken Stone? You choose.
So there you go. Readymades will be ready once they're all tested, in stock, photo'd, and
sound sampled -- a week or two. Kits shortly after.
Cheers,
Scott