Cgs synth

Hi

> The parts list lists:
> 100nF 1206 SMD
> but I can't find any SMD parts on the component overlay.
>

The SMD caps go on the back, this happens on a few of Ken's boards.
Soldering a couple of SMDs is easy, soldering in 100s would be tedious.

> Also the parts lists contains a "BC557" although
> the schematic says "BC558".
> Seems not to be very critical but may confuse someone.

I can only see 548 and 558s on the list.

> The SSM2210/LM394 and all pin-compatible parts in DIP8 package
> seem to fit only when the pins 4 and 5 (both NC) are cut off or they
> are installed in a DIP6 socket (ugly).

if you use an 8 pin socket, remove pins 4,5, they are NC on the LM394
8DIP, the LM394 can version has just 6 legs.
I'm very pleased Ken has accomodated 2SC1583 users on this PCB -
(my dual npn of choice for many modules).
Andrew