Of course, I could always use your Gate to Trigger Converter! Just
answered my own question.
Cheers
answered my own question.
Cheers
--- In cgs_synth@yahoogroups.com, "stuadh" <stuadh@...> wrote:
>
> Wow,
>
> thanks for getting back so quickly.
>
> Two more questions, if I may. Q5, below sounded dumb, but what I
> meant was what is the voltage range (ie is it compatible with Doepfer
> & A systems kit - I assume it is).
>
> And Q6, is there a simple way to make the pulse out a trigger?
>
> Much appreciated
>
> Stuadh
>
> PS - I've spent the last few months agonizing over which sequencer to
> buy and here I find the perfect one all along!
>
> --- In cgs_synth@yahoogroups.com, sasami@ wrote:
> >
> > Programmer:
> >
> > >1. I'm not sure I understand how to limit the number of steps in the
> > >sequence and what exactly the Ext Pulse does. For example, if you
> > >want to run from steps 3 through to 7, would you patch the pulse of
> > >step 7 to the Ext pulse of step 3?
> >
> > You would patch the pulse of step 8 (not 7) to Ext pulse of step
3. When
> > step 8 is activated, it immediately activates step 3, cancelling
> itself in
> > the process.
> >
> > >2. With respect to the push buttons, do these act as a "reset to this
> > >step" button?
> >
> > Exactly.
> >
> >
> > >3. Would wiring a debounced, push-button from the +15V to the up (or
> > >down) input (as suggested in an earlier post) act as a one step
> advance?
> >
> > Yes.
> >
> > >4. On the A boards, pulse out circuit, could all stages be wired
> > >through switches to a single LED, 820R, pulse-out and 680R? The
> > >reasoning behind this is to replicate more conventional sequencers
> > >where each row of switches goes to a single indicating LED and
socket.
> > > And then add four rows of switches.
> >
> > You would want to add a 1N4148 diode into the circuit per stage,
exactly
> > where the LED is shown, then go to your switch etc.
> >
> > >5. What voltages do the pots put out (at 12V if anyone knows,
> > >otherwise, at 15V)?
> >
> > The total is adjustable by tweaking the values of the resistors in
> the CV
> > buffers
> >
> > >6. What voltage do the stage pulse outs, the CPO and AEP produce? Do
> > >the stages produce a trigger or gate?
> >
> > 5- 6 volts approx. Pulse Outs are GATE. CPO/AEP triggers. There
may be a
> > fault with one of these I haven't investigated yet. I've heard of
> some CPOs
> > apparently not working - it may just be user error.
> >
> > Ken
> >
_______________________________________________________________________
> > Ken Stone sasami@
> > Modular Synth PCBs for sale <http://www.blaze.net.au/~sasami/synth/>
> > Australian Miniature Horses & Ponies
<http://www.blaze.net.au/~sasami/>
> >
>