Ken,
I'm buying in supplies for the Programmer. Can you explain what the
1206 SMD (Static Memory Device?) and the Monoblock capacitors are, please.
I'm buying in supplies for the Programmer. Can you explain what the
1206 SMD (Static Memory Device?) and the Monoblock capacitors are, please.
--- In cgs_synth@yahoogroups.com, "stuadh" <stuadh@...> wrote:
>
> Of course, I could always use your Gate to Trigger Converter! Just
> answered my own question.
>
> Cheers
>
> --- In cgs_synth@yahoogroups.com, "stuadh" <stuadh@> wrote:
> >
> > Wow,
> >
> > thanks for getting back so quickly.
> >
> > Two more questions, if I may. Q5, below sounded dumb, but what I
> > meant was what is the voltage range (ie is it compatible with Doepfer
> > & A systems kit - I assume it is).
> >
> > And Q6, is there a simple way to make the pulse out a trigger?
> >
> > Much appreciated
> >
> > Stuadh
> >
> > PS - I've spent the last few months agonizing over which sequencer to
> > buy and here I find the perfect one all along!
> >
> > --- In cgs_synth@yahoogroups.com, sasami@ wrote:
> > >
> > > Programmer:
> > >
> > > >1. I'm not sure I understand how to limit the number of steps
in the
> > > >sequence and what exactly the Ext Pulse does. For example, if you
> > > >want to run from steps 3 through to 7, would you patch the pulse of
> > > >step 7 to the Ext pulse of step 3?
> > >
> > > You would patch the pulse of step 8 (not 7) to Ext pulse of step
> 3. When
> > > step 8 is activated, it immediately activates step 3, cancelling
> > itself in
> > > the process.
> > >
> > > >2. With respect to the push buttons, do these act as a "reset
to this
> > > >step" button?
> > >
> > > Exactly.
> > >
> > >
> > > >3. Would wiring a debounced, push-button from the +15V to the
up (or
> > > >down) input (as suggested in an earlier post) act as a one step
> > advance?
> > >
> > > Yes.
> > >
> > > >4. On the A boards, pulse out circuit, could all stages be wired
> > > >through switches to a single LED, 820R, pulse-out and 680R? The
> > > >reasoning behind this is to replicate more conventional sequencers
> > > >where each row of switches goes to a single indicating LED and
> socket.
> > > > And then add four rows of switches.
> > >
> > > You would want to add a 1N4148 diode into the circuit per stage,
> exactly
> > > where the LED is shown, then go to your switch etc.
> > >
> > > >5. What voltages do the pots put out (at 12V if anyone knows,
> > > >otherwise, at 15V)?
> > >
> > > The total is adjustable by tweaking the values of the resistors in
> > the CV
> > > buffers
> > >
> > > >6. What voltage do the stage pulse outs, the CPO and AEP
produce? Do
> > > >the stages produce a trigger or gate?
> > >
> > > 5- 6 volts approx. Pulse Outs are GATE. CPO/AEP triggers. There
> may be a
> > > fault with one of these I haven't investigated yet. I've heard of
> > some CPOs
> > > apparently not working - it may just be user error.
> > >
> > > Ken
> > >
> _______________________________________________________________________
> > > Ken Stone sasami@
> > > Modular Synth PCBs for sale <http://www.blaze.net.au/~sasami/synth/>
> > > Australian Miniature Horses & Ponies
> <http://www.blaze.net.au/~sasami/>
> > >
> >
>