--- In cgs_synth@yahoogroups.com, sasami@... wrote:
For first test this should not be a Problem, as i understand things.I
hope so
Tube wiring seems done good to me
no other Idea what could be done wrong ?
Maybe bad tubes ?
For me it seems all ok
thanks for help, hope you have some more,
H.C.
>space
>
> >while building, there where some things not clear:
> >The Bridge beside the Tube: i made the shorter one
> >And the 330k Resistor vs. ???. It's written: one or other. I put the
> >330K in there.
>
> Yes, I need to update my document. Use solid line link and resistor
> marked 330k OR use dotted link and put 330k in the "empty" resistor.__ok, so this is done right
>__ that will take some time to get the 220N in better quality.
> >The 220N Caps under the Tubes are Ceramic as i had no others.
> >If this matters i can change them later
>
> Yes. Use better caps here. They are in the audio path.
For first test this should not be a Problem, as i understand things.I
hope so
>__Not so much, as you have very detailed Photos on your site.
> Make sure you have the tube wires right - they can be confusing.
>
Tube wiring seems done good to me
no other Idea what could be done wrong ?
Maybe bad tubes ?
For me it seems all ok
thanks for help, hope you have some more,
H.C.
> Ken
> _______________________________________________________________________
> Ken Stone sasami@...
> Modular Synth PCBs for sale <http://www.cgs.synth.net/>
> Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>
>