Cgs synth

>Would it also be a good idea to decrease the 100K, 150K and 220K

Take them down to 18k like the other speed controlled channel.

>Something I noticed on the PCB are three two-hole connector points.
>One set is above the 150K resistor, the second is to the right of the
>220K resistor and the third is near the centre of the PCB. What are
>these?

These are where you add your new 1M speed control pots. You will need to cut
the short piece of track between each pair of unused holes. The new pots are
then connected between each pair of holes. You only need two wires to each pot.

Ken
_______________________________________________________________________
Ken Stone sasami@...
Modular Synth PCBs for sale <http://www.blaze.net.au/~sasami/synth/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>