Hello Oscar,
Just a note for you and any CGS readers. The trimpot designators you have
used are from my schematics for the Panther version of the circuit. Ken's
circuits do not use these designators so you need to cross-reference as
follows:-
CGS735 (Panther), CGS35E (CGS)
P201, CV REJECT
P202, RES TRIM
P206, SPAN TRIM
Best Regards
(Mr) Laurie Biddulph
Phone: +61 (0)2 4340 0938
Mobile: 0400 257 645
Elby Designs
ABN: 70 022 727 605
http://www.elby-designs.com
This e-mail and any files transmitted with it are confidential and intended
for the addressee only.
If you are not the addressee you may not copy, forward, disclose or
otherwise use it, or any part of it, in any form whatsoever. If you have
received this e-mail in error please notify the sender and ensure that all
copies of this e-mail and any files transmitted with it are deleted.
Any views or opinions represented in this e-mail are solely those of the
author and do not necessarily represent those of Elby Designs.
Although this e-mail and its attachments have been scanned for the presence
of computer viruses, Elby Designs will not be liable for any losses as a
result of any viruses being passed on.
Just a note for you and any CGS readers. The trimpot designators you have
used are from my schematics for the Panther version of the circuit. Ken's
circuits do not use these designators so you need to cross-reference as
follows:-
CGS735 (Panther), CGS35E (CGS)
P201, CV REJECT
P202, RES TRIM
P206, SPAN TRIM
Best Regards
(Mr) Laurie Biddulph
Phone: +61 (0)2 4340 0938
Mobile: 0400 257 645
Elby Designs
ABN: 70 022 727 605
http://www.elby-designs.com
This e-mail and any files transmitted with it are confidential and intended
for the addressee only.
If you are not the addressee you may not copy, forward, disclose or
otherwise use it, or any part of it, in any form whatsoever. If you have
received this e-mail in error please notify the sender and ensure that all
copies of this e-mail and any files transmitted with it are deleted.
Any views or opinions represented in this e-mail are solely those of the
author and do not necessarily represent those of Elby Designs.
Although this e-mail and its attachments have been scanned for the presence
of computer viruses, Elby Designs will not be liable for any losses as a
result of any viruses being passed on.
----- Original Message -----
From: "osaiber" <osaiber@...>
To: <cgs_synth@yahoogroups.com>
Sent: Wednesday, August 01, 2007 10:06 AM
Subject: [cgs_synth] Test Calibration Synthacon filter Panther.
Hello!
I'm newbie in DIY. I just have mounted three synthacon filters. All
looks good.
I read in the manual but I have not achieved to calibrate the filters
with the three trim resistors, P 206, P202 P201 .
Can anybody explain in a detailed way how make it?
Many Thanks in advance,
Òscar.
The CGS Modular Synth home page: http://www.cgs.synth.net/
Yahoo! Groups Links