Hi,
Another major improvement was released by Ken yesterday. Replace diodes
D201, D204, D207 and D210 with wire links. This will give you substantially
increased range and a much better range from the Resonance pot.
Best Regards
(Mr) Laurie Biddulph
Phone: +61 (0)2 4340 0938
Mobile: 0400 257 645
Elby Designs
ABN: 70 022 727 605
http://www.elby-designs.com
This e-mail and any files transmitted with it are confidential and intended
for the addressee only.
If you are not the addressee you may not copy, forward, disclose or
otherwise use it, or any part of it, in any form whatsoever. If you have
received this e-mail in error please notify the sender and ensure that all
copies of this e-mail and any files transmitted with it are deleted.
Any views or opinions represented in this e-mail are solely those of the
author and do not necessarily represent those of Elby Designs.
Although this e-mail and its attachments have been scanned for the presence
of computer viruses, Elby Designs will not be liable for any losses as a
result of any viruses being passed on.
Another major improvement was released by Ken yesterday. Replace diodes
D201, D204, D207 and D210 with wire links. This will give you substantially
increased range and a much better range from the Resonance pot.
Best Regards
(Mr) Laurie Biddulph
Phone: +61 (0)2 4340 0938
Mobile: 0400 257 645
Elby Designs
ABN: 70 022 727 605
http://www.elby-designs.com
This e-mail and any files transmitted with it are confidential and intended
for the addressee only.
If you are not the addressee you may not copy, forward, disclose or
otherwise use it, or any part of it, in any form whatsoever. If you have
received this e-mail in error please notify the sender and ensure that all
copies of this e-mail and any files transmitted with it are deleted.
Any views or opinions represented in this e-mail are solely those of the
author and do not necessarily represent those of Elby Designs.
Although this e-mail and its attachments have been scanned for the presence
of computer viruses, Elby Designs will not be liable for any losses as a
result of any viruses being passed on.
----- Original Message -----
From: "osaiber" <osaiber@...>
To: <cgs_synth@yahoogroups.com>
Sent: Wednesday, August 08, 2007 10:50 PM
Subject: [cgs_synth] Re: Test Calibration Synthacon filter Panther.
>
>
> --- In cgs_synth@yahoogroups.com, "Laurie Biddulph" <elby_designs@...>
> wrote:
>>
>> Hi Oscar,
>>
>> Glad that is sorted out.
>>
>> First of all we will attack the noise problem. This is a well
> documented
>> problem and there is a small error on the pcb which you need to look
> at (I
>> thought I had already advised you of this, but so many things
> happening
>> lately). Anyway, at one end of the board is a resistor and capacitor
> (R210
>> and C207). Turn the board so that they are nearest to you and the pots
> are
>> on your left. You need to desolder the right-hand leg of the resistor
> and
>> the left-hand leg of the capacitor and then join these 2 legs together
> in
>> mid air. This should resolve the noise problem.
>
> I have already fixed it. The filter have lost the noise and have
> increased the width range frequency.
>
>
> Regards.
>
>
>
>
>
>
> The CGS Modular Synth home page: http://www.cgs.synth.net/
>
> Yahoo! Groups Links
>
>
>
>