Hi everybody...
I build half of the gate to trigger converter just now in an attempt
to make a nice clean click sound. I am using one of these switches:
http://www.piezoswitch.com/about_switches.html
...and the switch is a momentary Normally Open SPST switch that passes
+9V from a regular 9V battery when I "depresss" it. The +9V is going
to the Gate input of the circuit here:
http://www.cgs.synth.net/modules/cgs24_gatetotrigger.html
It ALMOST works except that it seems to send a trigger only when I
release the button... Any obvious reason this could be happening?
The switch itself has some mysterious potted electronics in it which
may be influencing things... is something funny because I only built
half of it?
Also, the shape of the click isn't sounding quite right:
http://obsoleteconsole.blogspot.com/2007/08/clicks.html#links
Any advice about shaping the trigger output a little more?
Thanks for any help,
Rafael
I build half of the gate to trigger converter just now in an attempt
to make a nice clean click sound. I am using one of these switches:
http://www.piezoswitch.com/about_switches.html
...and the switch is a momentary Normally Open SPST switch that passes
+9V from a regular 9V battery when I "depresss" it. The +9V is going
to the Gate input of the circuit here:
http://www.cgs.synth.net/modules/cgs24_gatetotrigger.html
It ALMOST works except that it seems to send a trigger only when I
release the button... Any obvious reason this could be happening?
The switch itself has some mysterious potted electronics in it which
may be influencing things... is something funny because I only built
half of it?
Also, the shape of the click isn't sounding quite right:
http://obsoleteconsole.blogspot.com/2007/08/clicks.html#links
Any advice about shaping the trigger output a little more?
Thanks for any help,
Rafael