Cgs synth

Cheers Ken.

Testing Ahoy!

Dave

On 13 Oct 2007, at 01:16, sasami@... wrote:

> You will be fine leaving pins 1 and 2 in the swapped position. No harm
> will
> come to the tube.
>
> Ken
>
> >Hi
> >
> >I've built a green REV 1.1 board, and plan to include a DPDT toggle
> to
> >switch between dirty and clean.
> >As per the info on the CGS site, either the 330K resistor and solid
> >line link *OR* 330K in the unlabelled slot and the broken line are
> >connected.
> >( someone posted here a while back that they'd had success with a
> >switch....)
> >
> >Question is, do pins 1 + 2 of the 1SH24b need to be swapped too?. At
> >the moment, they're connected to the additional "swapped" pin 1 and 2
> >holes provided on the rev 1.1 pcb.
> >Will the tube come to any harm if they're left there, whilst the
> other
> >connections are switched?
> >
> >cheers,
> >Dave
> >
> >
> >
> >The CGS Modular Synth home page: http://www.cgs.synth.net/
> >
> >Yahoo! Groups Links
> >
> >
> >
> >
> __________________________________________________________
> Ken Stone sasami@...
> Modular Synth PCBs for sale <http://www.cgs.synth.net/>
> Australian Miniature Horses & Ponies
> <http://www.blaze.net.au/~sasami/>
>
>
>
>

[Non-text portions of this message have been removed]