Yes, almost, but make sure your meter has better than 1% accuracy. Many
don't.
You don't have to match 100K ohms. You just have to match the resistors
to each other, since the gain is determined by their ratios to each
other. So if they're all 99.83 K, that's alright.
John Loffink
jloffink@...
The Microtonal Synthesis Web Site
http://www.microtonal-synthesis.com/
The Wavemakers Modular and Integrated Synthesizer Web Site
http://www.wavemakers-synth.com/
don't.
You don't have to match 100K ohms. You just have to match the resistors
to each other, since the gain is determined by their ratios to each
other. So if they're all 99.83 K, that's alright.
John Loffink
jloffink@...
The Microtonal Synthesis Web Site
http://www.microtonal-synthesis.com/
The Wavemakers Modular and Integrated Synthesizer Web Site
http://www.wavemakers-synth.com/
>cluster
> Given that Ken recommends matching most of the resistors in the cv
> module, I thought I would give it a try. All I have is a digitalabout
> voltmeter. Is this the only piece of equipment I need to try matching
> resistors? Is it as "simple" as reading the ohms on my meter (say,
> 100 kohms for 100k resistor) and selecting the resistors that have the
> closest readings to 100k ohms and to each other?
>
> Thanks ("diy electronically challenged"), Jeff
>
>