On 2007-12-11 16:30 +0100, Joachim wrote:
to replace the trigger processor by three V-trig to S-trig
converters (cf. the Moog schematic in the previous post). One for
EG1+EG2, one for EG1 and one for the S&H to bind them all. Total
cost : 3 transistors, 3 diodes and 3 resistors, 6 pads.
And if you have extra empty space on the PCB, you could even
include a reciprocal S-trig to V-trig converter for those who want
to drive something with the TRIG OUT of their MS. See today's
"S-trig to V-trig converter questions" thread on synth-diy...
--
André Majorel <URL:http://www.teaser.fr/~amajorel/>
Do not use this account for regular correspondence.
See the URL above for contact information.
> > > http://www.sequencer.de/synthesizer/viewtopic.php?t=18099Is this to drive an MS-20 or similar ? In that case you might want
>
> The link to the german forum shows a thread in which I
> discuss a PCB for the Magnus Danielson Oct/Hz Converter.
> People suggested to add a trigger converter and therefore in the
> last version I added a full MS-02 trigger processor.
to replace the trigger processor by three V-trig to S-trig
converters (cf. the Moog schematic in the previous post). One for
EG1+EG2, one for EG1 and one for the S&H to bind them all. Total
cost : 3 transistors, 3 diodes and 3 resistors, 6 pads.
And if you have extra empty space on the PCB, you could even
include a reciprocal S-trig to V-trig converter for those who want
to drive something with the TRIG OUT of their MS. See today's
"S-trig to V-trig converter questions" thread on synth-diy...
--
André Majorel <URL:http://www.teaser.fr/~amajorel/>
Do not use this account for regular correspondence.
See the URL above for contact information.