very nice, i'm working on a similar concept, only 4u and silver.
good selection/combination of modules, as well, i think they'll be
very useful musically. you might consider putting in a lfo (single,
or minimal-feature dual) instead of the mult on th gate panel?
you're gonna want a clock...
bbob
good selection/combination of modules, as well, i think they'll be
very useful musically. you might consider putting in a lfo (single,
or minimal-feature dual) instead of the mult on th gate panel?
you're gonna want a clock...
bbob
--- In cgs_synth@yahoogroups.com, "krimotm" <kmaadi@...> wrote:
>
> Hello group,
>
> to save panel costs I made a standard 19" 5U panel layout for
> multiple modules. I'm using cheap small knobs that resemble
standard
> MOTM knobs very much that are 20mm at the base and 16 mm at the
top
> giving sufficient finger space.
>
> I've just uploaded two examples I'm about to order ("19" 5U
panels"
> folder):
>
> Gate panel:
> -CGS gate sequencer + CV adapter
> -Multiple
> -CGS burst generator
> -CGS pulse divider & logic
> -CGS slope detector
> -CGS mixer
>
> Drum panel:
> -2X CGS Cynare
> -CGS Chime
> -2X CGS Drum
> -CGS Digital noise
> -Oakley VC-ADSR
> -2X CGS Tube VCA
> -CGS Mixer
>
> 15+ modules including a gate sequencer for < 300 Euro's including
> shipping!
>
> The legending around the switches and spacing for the gate
sequencer
> switch boards isn't properly layed out yet.
>
> Any feedback is appreciated!
>
> Cheers!
>
> Krimo
>