thanks Ken, yeah I was thinkng just use 100v caps. good point about
the leds...most likely would have missed that.
best,
Jeff
the leds...most likely would have missed that.
best,
Jeff
--- In cgs_synth@yahoogroups.com, sasami@... wrote:
>
> You'd need to move to higher voltages on your electros to be safe,
and
> increase the value of the LED resistors.
>
> Ken
>
> >Hi folks,
> >I need a +/-25 volt dc power supply, 200 ma. Would feeding 50
volts
> >into the cgs66 be ok/safe? The output would be about +/-25 v,
right?
> >
> >This is for racking a ward beck preamp module from a mixing
console.
> >
> >
> >thanks for any lead,
> >Jeff
> >
> >
> >
> >The CGS Modular Synth home page: http://www.cgs.synth.net/
> >
> >Yahoo! Groups Links
> >
> >
> >
> >
>
_____________________________________________________________________
__
> Ken Stone sasami@...
> Modular Synth PCBs for sale <http://www.cgs.synth.net/>
> Australian Miniature Horses & Ponies
<http://www.blaze.net.au/~sasami/>
>