Cgs synth

>Near the power connector, there is a cloverleaf group of holes in the
>pcb. What's that for?

Cooling. The holes are directly below a pair of dropper resistors. Overkill
really, but I've seen enough singed PCBs in my time to know to add
ventilation when it may be needed.

>Also, is it possible to add additional boards to generate longer
>sequences?

By using the inhibit input, it would be possible to switch between several,
but as this is a switch rather than a full blown sequencer, you may find you
don't get exactly what you expect.

Alternatively, you could run several in parallel, using the reset line to
make sure they started in sync, then use another sequencial switch to select
which of the other sequencers you were using the output from. 64 steps this way.

Ken
_______________________________________________________________________
Ken Stone sasami@...
Modular Synth PCBs for sale <http://www.blaze.net.au/~sasami/synth/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>