I will definitely be buying 2-4 of the euro sized pcbs when they are out!
--- In cgs_synth@yahoogroups.com, sasami@... wrote:
>
>
> >i hope you get enough this time that they don't sell out quite so quick ;)
>
> I ordered twice as many as I expected I would need. It was just that instead
> of ordering two each, every one seemed to want four!
> There is still a component value I need to check before I run them again,
> and interuptions have prevented me from finishing up my test unit.
>
> On the Euro version there is a capacitor that is 2n2, when in the original
> designs it was 22n. My mistake. Increasing the corresponding resistor to
> 220k solved the issue without me ever realising the mistake - I thought it
> was due to the higher gain of the transistors used.
> This 6 x 2 board has the capacitor correctly marked at 22n BUT the resistor
> is still 220k, where it should probably need to be 22k. It is the resistor
> connected to the four emitters of the transistor core.
>
> Keep this in mind when assemblin it. There is a spare 22k resistor in the
> parts list for this reason.
>
> Ken
> _______________________________________________________________________
> Ken Stone sasami@... otherunicorn@...
> Modular Synth PCBs for sale <http://www.cgs.synth.net/>
> Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>
>