new Serge VSC clone - CGS75
2009-06-15 by jesse.mejia@rocketmail.com
Yahoo Groups archive
Index last updated: 2026-04-28 23:16 UTC
Thread
2009-06-15 by jesse.mejia@rocketmail.com
2009-06-15 by Ken Stone
>It was discussed on www.muffwiggler.com, where it was prepared for a project that is going on over there. The stock immediately sold out.
> hxxp://www.cgs.synth.net/modules/cgs75_vcs.html
>
> I've been looking - nay - wishing that something like this would turn up.. but it seems to good to be true.
>
> "This page is being uploaded early to give access to ther BOM for those who wish to buy parts."
>
> This implies there has been some discussion somewhere that maybe I'm missing - is there a way I can put an early order in? I lust for no module more than the venerable VCS. (at least currently. . .)
>
2009-07-04 by jesse.mejia@rocketmail.com
--- In cgs_synth@yahoogroups.com, "Ken Stone" <sasami@...> wrote:
>
> --- In cgs_synth@yahoogroups.com, "jesse.mejia@" <jesse.mejia@> wrote:
> >
> > hxxp://www.cgs.synth.net/modules/cgs75_vcs.html
> >
> > I've been looking - nay - wishing that something like this would turn up.. but it seems to good to be true.
> >
> > "This page is being uploaded early to give access to ther BOM for those who wish to buy parts."
> >
> > This implies there has been some discussion somewhere that maybe I'm missing - is there a way I can put an early order in? I lust for no module more than the venerable VCS. (at least currently. . .)
> >
>
> It was discussed on www.muffwiggler.com, where it was prepared for a project that is going on over there. The stock immediately sold out.
>
> More will come later.
>
> Ken
>
2009-07-04 by sasami@hotkey.net.au
>Great news - where's the best place to watch for announcements re: morepcbs? :)
>up.. but it seems to good to be true.
>Thanks for such an amazing service to us all!
>
>-Jesse
>
>--- In cgs_synth@yahoogroups.com, "Ken Stone" <sasami@...> wrote:
>>
>> --- In cgs_synth@yahoogroups.com, "jesse.mejia@" <jesse.mejia@> wrote:
>> >
>> > hxxp://www.cgs.synth.net/modules/cgs75_vcs.html
>> >
>> > I've been looking - nay - wishing that something like this would turn
>> >who wish to buy parts."
>> > "This page is being uploaded early to give access to ther BOM for those
>> >missing - is there a way I can put an early order in? I lust for no module
>> > This implies there has been some discussion somewhere that maybe I'm
>> >project that is going on over there. The stock immediately sold out.
>>
>> It was discussed on www.muffwiggler.com, where it was prepared for a
>>_______________________________________________________________________
>> More will come later.
>>
>> Ken
>>
>
>
>
>
>------------------------------------
>
>The CGS Modular Synth home page: http://www.cgs.synth.net/
>Yahoo! Groups Links
>
>
>
>
2009-07-04 by T3h caTmaN
>Great news - where's the best place to watch for announcements re: morepcbs? :)
>up.. but it seems to good to be true.
>Thanks for such an amazing service to us all!
>
>-Jesse
>
>--- In cgs_synth@yahoogroups.com, "Ken Stone" <sasami@...> wrote:
>>
>> --- In cgs_synth@yahoogroups.com, "jesse.mejia@" <jesse.mejia@> wrote:
>> >
>> > hxxp://www.cgs.synth.net/modules/cgs75_vcs.html
>> >
>> > I've been looking - nay - wishing that something like this would turn
>> >who wish to buy parts."
>> > "This page is being uploaded early to give access to ther BOM for those
>> >missing - is there a way I can put an early order in? I lust for no module
>> > This implies there has been some discussion somewhere that maybe I'm
>> >project that is going on over there. The stock immediately sold out.
>>
>> It was discussed on www.muffwiggler.com, where it was prepared for a
>>__________________________________________________________
>> More will come later.
>>
>> Ken
>>
>
>
>
>
>------------------------------------
>
>The CGS Modular Synth home page: http://www.cgs.synth.net/
>Yahoo! Groups Links
>
>
>
>
2009-07-04 by sasami@hotkey.net.au
>i hope you get enough this time that they don't sell out quite so quick ;)I ordered twice as many as I expected I would need. It was just that instead
2009-07-15 by intellijel
--- In cgs_synth@yahoogroups.com, sasami@... wrote:
>
>
> >i hope you get enough this time that they don't sell out quite so quick ;)
>
> I ordered twice as many as I expected I would need. It was just that instead
> of ordering two each, every one seemed to want four!
> There is still a component value I need to check before I run them again,
> and interuptions have prevented me from finishing up my test unit.
>
> On the Euro version there is a capacitor that is 2n2, when in the original
> designs it was 22n. My mistake. Increasing the corresponding resistor to
> 220k solved the issue without me ever realising the mistake - I thought it
> was due to the higher gain of the transistors used.
> This 6 x 2 board has the capacitor correctly marked at 22n BUT the resistor
> is still 220k, where it should probably need to be 22k. It is the resistor
> connected to the four emitters of the transistor core.
>
> Keep this in mind when assemblin it. There is a spare 22k resistor in the
> parts list for this reason.
>
> Ken
> _______________________________________________________________________
> Ken Stone sasami@... otherunicorn@...
> Modular Synth PCBs for sale <http://www.cgs.synth.net/>
> Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>
>
2009-07-16 by jesse.mejia@rocketmail.com
--- In cgs_synth@yahoogroups.com, "intellijel" <danjel@...> wrote:
>
> I will definitely be buying 2-4 of the euro sized pcbs when they are out!
>
>
>
> --- In cgs_synth@yahoogroups.com, sasami@ wrote:
> >
> >
> > >i hope you get enough this time that they don't sell out quite so quick ;)
> >
> > I ordered twice as many as I expected I would need. It was just that instead
> > of ordering two each, every one seemed to want four!
> > There is still a component value I need to check before I run them again,
> > and interuptions have prevented me from finishing up my test unit.
> >
> > On the Euro version there is a capacitor that is 2n2, when in the original
> > designs it was 22n. My mistake. Increasing the corresponding resistor to
> > 220k solved the issue without me ever realising the mistake - I thought it
> > was due to the higher gain of the transistors used.
> > This 6 x 2 board has the capacitor correctly marked at 22n BUT the resistor
> > is still 220k, where it should probably need to be 22k. It is the resistor
> > connected to the four emitters of the transistor core.
> >
> > Keep this in mind when assemblin it. There is a spare 22k resistor in the
> > parts list for this reason.
> >
> > Ken
> > _______________________________________________________________________
> > Ken Stone sasami@ otherunicorn@
> > Modular Synth PCBs for sale <http://www.cgs.synth.net/>
> > Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>
> >
>