I could not find a lin 20k pot at Mouser that has a knurled shaft for my
push on knobs. I can go with a non knurled shaft but that would require a
different knob, which would look weird with everything else. It's
frustrating looking for parts sometimes. I will look some where else. Thanks
folks for your feedback.
pete
push on knobs. I can go with a non knurled shaft but that would require a
different knob, which would look weird with everything else. It's
frustrating looking for parts sometimes. I will look some where else. Thanks
folks for your feedback.
pete
On Sun, May 9, 2010 at 1:06 PM, Richard Brewster <pugix@...> wrote:
>
>
> I used center detent pots on the Rise and Fall CV reversible attenuators
> on my VCS. But I haven't decided yet whether I'll keep them. They are
> the inexpensive Alpha pots, and the detent position is a little flaky.
> When it snaps in, it's never precisely in the same spot, just close.
>
> Richard Brewster
> http://pugix.com
>
>
> On 5/9/10 1:35 AM, sasami@... <sasami%40hotkey.net.au> wrote:
> > 20k linear of the regular sort. Finding the zero position is usually not
> too
> > hard. Center detent pots introduce a "dead band" where it is impossible
> to
> > make fine adjustments because they keep snapping into their detent
> position.
> >
> > Ken
> >
> >
> >> What kind of pot do you need for the "processor". Doesn't this pot
> >> need to be a center detent pot since it should always be at 0 when
> >> it's in the middle position? So when you turn the pot towards the
> >> left, it should be going negative and positive from 0 to the right,
> >> correct? Where can I find a pot like this? I need a knurled type which
> >> is probably rare.
> >>
> >> thanks,
> >> pete
> >> --
> >> www.p23.biz
> >>
> >>
> >> ------------------------------------
> >>
> >> The CGS Modular Synth home page: http://www.cgs.synth.net/
> >> Yahoo! Groups Links
> >>
> >>
> >>
> >>
> >>
> > __________________________________________________________
> > Ken Stone sasami@... <sasami%40hotkey.net.au>
> otherunicorn@...<otherunicorn%40virginbroadband.com.au>
> > Modular Synth PCBs for sale<http://www.cgs.synth.net/>
> > Australian Miniature Horses& Ponies<http://www.blaze.net.au/~sasami/<http://www.blaze.net.au/%7Esasami/>
> >
> >
> >
> >
> >
>
>
>
--
www.p23.biz
[Non-text portions of this message have been removed]