Hi Ken , thanks for your reply. I should have mentioned that my soldering iron and test equipment are in storage , so i'm not able to buid the rrm or measure output.What other losses would you expect?Regardsgeoff
To: cgs_synth@yahoogroups.com
From: sasami@...
Date: Tue, 25 Oct 2011 04:03:55 +0000
Subject: Re: [cgs_synth] real ring modulator
I can't tell you what the output will be because there will also be other
losses in the system. It would be best to measure it.
Ken
voltage drop , will the ouput be 1volt p-p?
Ken Stone sasami@... otherunicorn@...
Modular Synth PCBs for sale <http://www.cgs.synth.net/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>
[Non-text portions of this message have been removed]
To: cgs_synth@yahoogroups.com
From: sasami@...
Date: Tue, 25 Oct 2011 04:03:55 +0000
Subject: Re: [cgs_synth] real ring modulator
I can't tell you what the output will be because there will also be other
losses in the system. It would be best to measure it.
Ken
>Hi All , have i got this right?mod and carrier inputs and the schottky diodes each measure 250mv forward
>Using the RRM as a freq. doubler , if i have a 1V p-p signal at both the
voltage drop , will the ouput be 1volt p-p?
>Thanks in advance.__________________________________________________________
>Regards
>
>
>
>------------------------------------
>
>The CGS Modular Synth home page: http://www.cgs.synth.net/
>Yahoo! Groups Links
>
>
>
>
Ken Stone sasami@... otherunicorn@...
Modular Synth PCBs for sale <http://www.cgs.synth.net/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>
[Non-text portions of this message have been removed]