Hi Stephen.
Go for the 20k. These days I usually specify "20k, 22k or 25k". Tolerance is
really sloppy on these, and being adjustable, it really doesn't matter.
Also, it is used as a voltage divider across +ve to 0V, again making the
exact value of little import.
With the exception of the 50k Q pot, all other pots and trimmers could be
100k and it would still work fine.
Cheers,
Ken
Ken Stone sasami@... otherunicorn@...
Modular Synth PCBs for sale <http://www.cgs.synth.net/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>
Go for the 20k. These days I usually specify "20k, 22k or 25k". Tolerance is
really sloppy on these, and being adjustable, it really doesn't matter.
Also, it is used as a voltage divider across +ve to 0V, again making the
exact value of little import.
With the exception of the 50k Q pot, all other pots and trimmers could be
100k and it would still work fine.
Cheers,
Ken
>Hi Kenthe Trimpot.
>
>I'm putting together a BOM for the BOG panel and just wanted to ask about
>or Horiz. trimpots.
>I'm finding it very hard to find a supplier for 22 or 25K Single turn Vert.
>20K Single turn Vert.
>When i built up the CGS77 PCB for the Best of CGS Panel #3 , i used a
>_______________________________________________________________________
>Should i do the same for the BOG or go for a 30K ?
>
>Stephen
>
Ken Stone sasami@... otherunicorn@...
Modular Synth PCBs for sale <http://www.cgs.synth.net/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>