Cgs synth

47k, 150k, 470k, 820R 680R

Cheers,
Ken

Ken

>> As i mentioned earlier in the thread this is the old style boards (non

RoHS), Just wondering at this point if there is a component value that might
be incorrect on all 8 stage boards.

>>
>
>okay, had an even closer look and i noticed that H was only going up to

6.7v when pressing the button so i figured this might have something to do
with resistor values.

>I went back over the boards and i noticed a discrepency between the

silkscreen rev A and the picture of the rev b boards on the CGS site.

>The row of resistors closest to the LED and diode on my board are (in order

of closest to farthest (47k,47k,470k,820r,680r) and the CGS site with the
revB boards (47k,150k,470k,820r,680r)

>
>Now to further complicate things i was following the values listed on the

website, BUT i got the 47k and 150k REVERSED which probably explains the
voltage drop.

>My question here is, Which should i follow for these REV A (non RoHS)

boards. 47k, 47k, or 47k, 150k?

>
>
>
>
>------------------------------------
>
>The CGS Modular Synth home page: http://www.cgs.synth.net/
>Yahoo! Groups Links
>
>
>
>

_______________________________________________________________________
Ken Stone sasami@... otherunicorn@...
Modular Synth PCBs for sale <http://www.cgs.synth.net/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>