Cgs synth

>I constantly have the same noise problem with the Best of CGS Voice panel

(Panel #3).

>
>Do you think this fix would apply here ?

Yes. It should fix the problem.

>
>
>________________________________
> From: cg_synth <sasami@...>
>To: cgs_synth@yahoogroups.com
>Sent: Saturday, March 17, 2012 11:02 AM
>Subject: [cgs_synth] Re: Bi n tic noise on power bus
>
>
>Â
>Try putting 10 ohm resistors in the power rails, and increase the value of

the on board electros. See what I did for the power input on the CGS21 super
psycho.

>Also try putting 100n directly across pins 8 and 1 of the 311, if it

doesn't already something there. Also check that you don't have any suspect
solder joints on the links on the power rails.

>Ken
>
>--- In cgs_synth@yahoogroups.com, "adematteo" <adematteo@...> wrote:
>>
>> Ok, no luck with that?
>> Thanks for any advice i do appreciate it!
>
>
>
>
>[Non-text portions of this message have been removed]
>
>
>
>------------------------------------
>
>The CGS Modular Synth home page: http://www.cgs.synth.net/
>Yahoo! Groups Links
>
>
>
>

_______________________________________________________________________
Ken Stone sasami@... otherunicorn@...
Modular Synth PCBs for sale <http://www.cgs.synth.net/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>