Ace Ken , thanks
________________________________
From: "sasami@..." <sasami@...>
To: cgs_synth@yahoogroups.com
Sent: Sunday, March 18, 2012 3:24 PM
Subject: Re: [cgs_synth] Re : noise on power bus
Ken
__________________________________________________________
Ken Stone sasami@... otherunicorn@...
Modular Synth PCBs for sale <http://www.cgs.synth.net/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>
[Non-text portions of this message have been removed]
________________________________
From: "sasami@..." <sasami@...>
To: cgs_synth@yahoogroups.com
Sent: Sunday, March 18, 2012 3:24 PM
Subject: Re: [cgs_synth] Re : noise on power bus
>How would i install the 10ohm resistors ?ÂReplace the beads on the individual circuit boards with resistors.
>Should they be somewhere between the PS and the input to the CGS Distro board
>Just Pos and Neg ; or Ground too?Just pos and neg.
>What higher value is suggested for the electros (your boards always use 10uF ,100uF.
>Should only the VCO's electros be changed or every module ?The VCO is the best place to start. Only do the others if it is still a problem.
Ken
__________________________________________________________
Ken Stone sasami@... otherunicorn@...
Modular Synth PCBs for sale <http://www.cgs.synth.net/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>
[Non-text portions of this message have been removed]