On 26 March 2012 19:32, Joachim <sonicwarrior@...> wrote:
mentions 12 diodes whereas the board only has 10. The ones missing on
the board are the two diodes facing opposite directions, connecting to
pin 2 of the TL072 near the top of the schematic. Those are basically
overshoot protection as far as I can tell and not strictly necessary
as long as you don't have ridiculously high CV voltages.
--
/Ove
Blog: <http://blog.gg8.se/>
"Here is Evergreen City. Evergreen is the color of green forever."
> Hi,When investigating the board schematic and board layout, the schematic
>
> I have two CGS48 Rev1.0 VCOs that I started stuffing today. But when I got
> to the 1N4148 diodes I only found 10 on the PCB while there are 12 in the parts list
> and schematic.
>
> Am I missing something?
mentions 12 diodes whereas the board only has 10. The ones missing on
the board are the two diodes facing opposite directions, connecting to
pin 2 of the TL072 near the top of the schematic. Those are basically
overshoot protection as far as I can tell and not strictly necessary
as long as you don't have ridiculously high CV voltages.
--
/Ove
Blog: <http://blog.gg8.se/>
"Here is Evergreen City. Evergreen is the color of green forever."