Would i wire it : resistor > outer leg of trimmer > trimmer wiper to remaining resistor pad > leave other side (outer) trimmer leg unconnected ?
________________________________
From: "sasami@..." <sasami@...>
To: cgs_synth@yahoogroups.com
Sent: Saturday, May 26, 2012 4:13 PM
Subject: Re: [cgs_synth] CGS 114 - Improving 1V/ Oct tracking on DUSG.
Yes, the 1k5 resistor connected to the 82k connected to pad E is the correct
resistor to be messing around with.
Ken
__________________________________________________________
Ken Stone sasami@... otherunicorn@...
Modular Synth PCBs for sale <http://www.cgs.synth.net/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>
[Non-text portions of this message have been removed]
________________________________
From: "sasami@..." <sasami@...>
To: cgs_synth@yahoogroups.com
Sent: Saturday, May 26, 2012 4:13 PM
Subject: Re: [cgs_synth] CGS 114 - Improving 1V/ Oct tracking on DUSG.
Yes, the 1k5 resistor connected to the 82k connected to pad E is the correct
resistor to be messing around with.
Ken
>Hi Ken495151
>
>It's TCB day on the BOCGS panel...
>
>I was about to do the mod mentioned here :
>
>http://www.muffwiggler.com/forum/viewtopic.php?p=495151&highlight=#
>in the schematic is marked as a 1.5K on the overlay.
>
>For improving 1V/ Oct tracking.
>
>
>When i looked at the schematic and then the PCB overlay it seems the 1.8K
>ahead with this mod ?
>http://www.cgs.synth.net/modules/pic/pcb_cgs114_dusg.gif
>
>
>Am i right in assuming the 1.5K is the one i'm changing out if i'm going
__________________________________________________________
Ken Stone sasami@... otherunicorn@...
Modular Synth PCBs for sale <http://www.cgs.synth.net/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>
[Non-text portions of this message have been removed]