Cgs synth

>first
>I am only using 6 outputs, abc and ijk.
>at first I had a jumper in place as shown.
>output looked like 9.44, 4.53, 4.53, 4.53, 4.53, 5.00 ( fixed 9v in
>top and 5 in bottom ( mod)).
>
>or something like that. I removed the jumper and get
>finer steps all different, which is what I excepted to get.

All of the voltages should be the exact same distance apart. The actual
voltages will be different, depending on the inputs, but the distance
between A and B should equal that between B an C, C and F, F and I, I and J
and J and K, assuming you havent linked the S,Y, X or T terminals.

>where should the jumper go - I looked careful, but I did
>not get it right the first time. any one have a pic they could
>provide?

Between pin 3 and 12 of the unused chip location.


Ken
_______________________________________________________________________
Ken Stone sasami@...
Modular Synth PCBs for sale <http://www.blaze.net.au/~sasami/synth/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>