Hi all,
I recently began stuffing a rev2 Super Psycho PCB; it seems that
the parts list and schematics on Ken's site differ slightly from the
board Ken sent me.
Can I just follow the designations on the board? If yes, what
voltage should the two 100uF caps be?
Also, just above the two 100uF's is what looks to be a space for
a trace labeled "OV"--do I just put a trace here?
And finally, there is a spot where a 100n cap is called for--yet the
pin spacing is somewhat wider than for the other 100n's... Er,
um...???
Thanks in advance for any responses.
Best wishes,
Bob
I recently began stuffing a rev2 Super Psycho PCB; it seems that
the parts list and schematics on Ken's site differ slightly from the
board Ken sent me.
Can I just follow the designations on the board? If yes, what
voltage should the two 100uF caps be?
Also, just above the two 100uF's is what looks to be a space for
a trace labeled "OV"--do I just put a trace here?
And finally, there is a spot where a 100n cap is called for--yet the
pin spacing is somewhat wider than for the other 100n's... Er,
um...???
Thanks in advance for any responses.
Best wishes,
Bob