Cgs synth

Hi all,

I recently began stuffing a rev2 Super Psycho PCB; it seems that
the parts list and schematics on Ken's site differ slightly from the
board Ken sent me.

Can I just follow the designations on the board? If yes, what
voltage should the two 100uF caps be?

Also, just above the two 100uF's is what looks to be a space for
a trace labeled "OV"--do I just put a trace here?

And finally, there is a spot where a 100n cap is called for--yet the
pin spacing is somewhat wider than for the other 100n's... Er,
um...???

Thanks in advance for any responses.

Best wishes,

Bob

>I recently began stuffing a rev2 Super Psycho PCB; it seems that
>the parts list and schematics on Ken's site differ slightly from the
>board Ken sent me.

Ah - lazy me - I must update that.

>Can I just follow the designations on the board? If yes, what
>voltage should the two 100uF caps be?

Yes. Use 25V (or 35V) 100uF caps

>Also, just above the two 100uF's is what looks to be a space for
>a trace labeled "OV"--do I just put a trace here?

That's so you can add a small wire loop to hook a test probe to. Ignore it
if you don't want it.

>And finally, there is a spot where a 100n cap is called for--yet the
>pin spacing is somewhat wider than for the other 100n's... Er,
>um...???

Tracks under the PCB prevented me from making it the same. Just bend the
wires to fit.

Ken
_______________________________________________________________________
Ken Stone sasami@...
Modular Synth PCBs for sale <http://www.blaze.net.au/~sasami/synth/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>