From the photos it looks okay to me. It's hard to tell on the track side for obvious reasons. Have you tried to simply get it to work as a Smooth, by leaving out the link between L and S?
---In cgs_synth@yahoogroups.com, <okayjustalittle@...> wrote:Photos are up !On 09/11/2013, at 9:28 PM, Stephen Richards <okayjustalittle@...> wrote:I'll try and get some photos up.I have desoldered a few components a few times the reversed BC557 and the J201 and a few wires.y wiring is a bit hackneyed as I use a larger gauge wire than the anchor holes allow but it's never really caused me grief and I've built 6 of these panels in the last 3 years and i'm onto 7th.The full SSG I built in Dmitri panel #2 works no problem.I had a similar situation as this on my first panel with a CGS29 Wave Mult. Ended up swapping it out for a Serge Wave Mult.I'll try the trimmer again too.Thanks , I'll keep you all posted.