Hi Ken
I have completed the COA panel #4 all except the CGS81 Panel Wiring. All clear sailing with everything working first time ; not calibrated yet.
On the Output Mixer , I
have wired only the CCW's (GND Bussed) and CW (Individual Panel Inputs on Each) for the Gain Pots.
My questions are :
Where does the Gain Pot wiper
signal go ? Straight to the Pan Pots ?
How do i make a Pan Pot from a Single Gang Pot (...not sure i can from my research.)
Am i right to assume that
after the Pan Pots , the signal would go Via the Tip of the AUX Jack to the Tip of the Output Jack ?
Or will i be bussing the Left and Right signals together off the Pan Pots , then to the PCB inputs respectively ; followed by PCB Outs to the Tip of the AUX Jack , then to the Tip of the Output Jack ?