Drokk !! Sorry Ken. I did not look at the actual link you gave me , that's much clearer. I'm sure i can sort it from there.
Thanks and Happy Xmas to you and the Ponies.
On Monday, December 23, 2013 10:23 PM, "sasami@..." <sasami@...> wrote:
Hi Stephen,
not even close, I'm afraid. you are still trying to wire it as a processor.
There are 47k and 150k resistors involved and you didn't even mention them.
Pan pot wiper goes to ground. Follow the actual link I gave you and look at
the diagram on that page.
http://www.cgs.synth.net/modules/cgs81_mixer.html
PCB Input.> Pan Pot CW to other side of the PCB Input ; both with 100K
Installed on PCB.> Inverted Outputs of PCB to Left and Right Output Jacks.
__________________________________________________________
Ken Stone sasami@... otherunicorn@...
Modular Synth PCBs for sale <http://www.cgs.synth.net/>
not even close, I'm afraid. you are still trying to wire it as a processor.
There are 47k and 150k resistors involved and you didn't even mention them.
Pan pot wiper goes to ground. Follow the actual link I gave you and look at
the diagram on that page.
http://www.cgs.synth.net/modules/cgs81_mixer.html
>Banana > Gain Pot , wired as described in my last email > Wiper of Gain Potvia a 100K Resistor to Wiper of Pan Pot.> Pan Pot CCW to one side of the
PCB Input.> Pan Pot CW to other side of the PCB Input ; both with 100K
Installed on PCB.> Inverted Outputs of PCB to Left and Right Output Jacks.
><sasami@...> wrote:
>Just wanting to figure out if this is right or not.Â
>
>Thanks again.
>
>
>
>On Monday, December 23, 2013 6:45 PM, "sasami@..."
__________________________________________________________
Ken Stone sasami@... otherunicorn@...
Modular Synth PCBs for sale <http://www.cgs.synth.net/>