The Original SSG may not have had any LEDs, or if it did, just LEDs for SMOOTH and STEPPED outputs. Ken has added an LED for the COUPLER output too - it's all shown on the schematic. You don't have to fit any or all LEDs to your panel.
http://loudestwarning.tumblr.com/
On Saturday, 4 August 2018, 16:13:40 BST, Mike Burnham mikejburnham@... [cgs_synth] <cgs_synth@yahoogroups.com> wrote:
I can only see 2 LEDs on the front panel
From: cgs_synth@yahoogroups.com <cgs_synth@yahoogroups.com> on behalf of Ken Stone otherunicorn@... [cgs_synth] <cgs_synth@yahoogroups.com>
Sent: 03 August 2018 23:33:37
To: cgs_synth@yahoogroups.com
Subject: Re: [cgs_synth] LEDs on SSG
Sent: 03 August 2018 23:33:37
To: cgs_synth@yahoogroups.com
Subject: Re: [cgs_synth] LEDs on SSG
Just a BOM error, 3 are used.
On Sat, Aug 4, 2018 at 7:39 AM, Paul Bower
paul@... [cgs_synth] <cgs_synth@yahoogroups.com> wrote:
What does the schematic say ?
Could be a typo in the BOM
On 3 Aug 2018, at 21:11, Mike Burnham mikejburnham@... [cgs_synth] <cgs_synth@yahoogroups.com> wrote:
A bit confused why there are 3 RLed on the pcb but only 2 on the BOM
Sent from my iPhone
This email has been scanned by Netintelligence
http://www.netintelligence. com/email
--