Cgs synth

The Original SSG may not have had any LEDs, or if it did, just LEDs for SMOOTH and STEPPED outputs. Ken has added an LED for the COUPLER output too - it's all shown on the schematic. You don't have to fit any or all LEDs to your panel.

http://loudestwarning.tumblr.com/

On Saturday, 4 August 2018, 16:13:40 BST, Mike Burnham mikejburnham@... [cgs_synth] <cgs_synth@yahoogroups.com> wrote:

I can only see 2 LEDs on the front panel

From: cgs_synth@yahoogroups.com <cgs_synth@yahoogroups.com> on behalf of Ken Stone otherunicorn@... [cgs_synth] <cgs_synth@yahoogroups.com>
Sent: 03 August 2018 23:33:37
To: cgs_synth@yahoogroups.com
Subject: Re: [cgs_synth] LEDs on SSG

Just a BOM error, 3 are used.

On Sat, Aug 4, 2018 at 7:39 AM, Paul Bower paul@... [cgs_synth] <cgs_synth@yahoogroups.com> wrote:

What does the schematic say ?

Could be a typo in the BOM

On 3 Aug 2018, at 21:11, Mike Burnham mikejburnham@... [cgs_synth] <cgs_synth@yahoogroups.com> wrote:

A bit confused why there are 3 RLed on the pcb but only 2 on the BOM

Sent from my iPhone

This email has been scanned by Netintelligence
http://www.netintelligence. com/email

Paul Bower
Un! Recordings Limited
Company Reg. 06870185

www.unrecordings.co.uk

--

Ken Stone otherunicorn@...