hi all,
I finaly got back to the bench and got my super psycho module
wired up. The tri wavea are really fat...cool. anyway here is my
question and ple for help...
I used pots with switches on them for each of the 6 voices.
I figured I would save on drilling holes and cost of seperate
switches. The problem is the switches are open with off and closed
when on ( when you turn the pot up ...). The circut requres the off
postion to ground the voices circuit thru the 820 ohm res.
there must be a simple "switch invertor" hack I can use or some other
simple
why to make a normaly open switch normaly closed ...
hope that is clear and any suggestions are welomed. mean while I am
making great sci-fi drones...I also change the glide cap to more of a
tone cap.. 0.47 uf and the overdrven range pot makes for a great
sound. I wired 4 voice for audio range and 2 for sub audio, gies me
some nice options.
anyway ta ta.
Jeff
I finaly got back to the bench and got my super psycho module
wired up. The tri wavea are really fat...cool. anyway here is my
question and ple for help...
I used pots with switches on them for each of the 6 voices.
I figured I would save on drilling holes and cost of seperate
switches. The problem is the switches are open with off and closed
when on ( when you turn the pot up ...). The circut requres the off
postion to ground the voices circuit thru the 820 ohm res.
there must be a simple "switch invertor" hack I can use or some other
simple
why to make a normaly open switch normaly closed ...
hope that is clear and any suggestions are welomed. mean while I am
making great sci-fi drones...I also change the glide cap to more of a
tone cap.. 0.47 uf and the overdrven range pot makes for a great
sound. I wired 4 voice for audio range and 2 for sub audio, gies me
some nice options.
anyway ta ta.
Jeff