You should check the archives for my Steiner VCF notes. It is not a matter
of simply "stuffing" the PCB irrespective of the revision.
John Loffink
The Microtonal Synthesis Web Site
http://www.microtonal-synthesis.com
The Wavemakers Synthesizer Web Site
http://www.wavemakers-synth.com
of simply "stuffing" the PCB irrespective of the revision.
John Loffink
The Microtonal Synthesis Web Site
http://www.microtonal-synthesis.com
The Wavemakers Synthesizer Web Site
http://www.wavemakers-synth.com
> -----Original Message-----
> From: Krimo [mailto:krimo@...]
> Sent: Saturday, February 07, 2004 5:13 AM
>
> Hi all,
>
> Doing Oakley SVF and CGS Steiner VCF this weekend. Got a few questions
> about the notes/modifications, mainly because I can't figure out
> difference between "Rev 1" and "first and second run" (I think second
> run isn't necessarily the same as Rev1?)
>
> -Is it correct that input elec's polarities are all correct on the rev 1
> pcb?
>
> -Is it correct that the 10 uF elec between output transistors and input
> of the op amp buffer still has to be installed backwards on the rev 1
> pcb?
>
> -Is it correct that all the changes suggested by Nyle Steiner are
> processed on the rev 1 pcb and that I can just "stuff away" except for
> last question?
>
> Thanks in advance,
>
> Krimo
>
>