The best advice I can give re the filters is to try it. This is a
development board after all. The schematic is taken from their app-note. If
we can improve the response, then excellent. Share what you find out. I
simply haven't had time to do anything more with my one of late.
Ken
Ken Stone sasami@... or ken@...
Modular Synth PCBs for sale <http://www.blaze.net.au/~sasami/synth/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>
development board after all. The schematic is taken from their app-note. If
we can improve the response, then excellent. Share what you find out. I
simply haven't had time to do anything more with my one of late.
Ken
>ok, I've played with it for a day now and the short mode does seem to_______________________________________________________________________
>work best. I think that it's the input and output filters that are doing
>filtering I described. I guess I was expecting the output to sound
>exactly the same as the input. but It seems that the cutoff on the input
>and output filters is pretty low (am I right?). Would it hurt anything
>to increase the cutoff on these filters? Most of the info I've found on
>delays talk about BBD circuits with a really low clock frequency
>compared to this. I'd think this chip would handle higher frequencies
>better because of the high sample rate. Is this the case or am I missing
>something? (I've got a feeling I am)
>
>so far, it sounds pretty nice. A bit noisy, but I haven't added the
>compander yet, and I actually dont' have the digital/analog grounds
>seperated for now.\
>
>thanks,
>Ryan
Ken Stone sasami@... or ken@...
Modular Synth PCBs for sale <http://www.blaze.net.au/~sasami/synth/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>