--- In cgs_synth@yahoogroups.com, Jeffrey Pontius <jpont@k...> wrote:
this is the source of my uncertainty ;-)
Ken wrote, in message 619, that the schematic is correct, but the
corrections that follow are different to the schematic.
on the schematic, the 1k8 goes to pin 7 of the 072 and 1k to ground.
so, should i go by the schematic or message 619?
actually, i followed the schematic and have got the vco up and
running. now trying to tune it -
that'll probably be the subject of my next post!
wish i had a scope....
andrew
> > i'm just finalising my 1st vco and am a little unsure as to thethanks Jeff
> > corrections -
> >
> >
> Check messages 619 and 620 (Jan, '04) in the cgs_synth Yahoo groups
> message archive.
> Jeff
this is the source of my uncertainty ;-)
Ken wrote, in message 619, that the schematic is correct, but the
corrections that follow are different to the schematic.
on the schematic, the 1k8 goes to pin 7 of the 072 and 1k to ground.
so, should i go by the schematic or message 619?
actually, i followed the schematic and have got the vco up and
running. now trying to tune it -
that'll probably be the subject of my next post!
wish i had a scope....
andrew