Cgs synth

>> CGS stuff is 1V/oct
>
>Howabout the Synthacon filter? I don't see any calibration trimpots...

It is more accurately described as "exponential". Using a 100k pot wired as
a level pot before the VC input would allow the scale to be adjusted. If
there isn't enough range, reduce the 220k CV input resistor. It's tracking
is not as accurate as some other filter types, so don't expect to be ablue
to use it as a second VCO with the resonance up.

Also have a look through the older messages at some of the alternate values
people have used to tweak it to suit themselves.

Ken
_______________________________________________________________________
Ken Stone sasami@... or ken@...
Modular Synth PCBs for sale <http://www.blaze.net.au/~sasami/synth/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>