Cgs synth

Wire them as standard input attenuators.

signal in to CW end. Wiper to input of filter. CCW end to 0v/gnd

Ken

>Regarding these potentiometers for HP/BP & LP, do they need to be
>put in series with the 47k resistors ?
>
>thx,
>Steven
>--- In cgs_synth@yahoogroups.com, sasami@h... wrote:
>>
>> >Please correct me if I'm wrong.
>> >
>> >Frequency=100k ohm audio
>>
>> Linear, not audio
>>
>> >Resonance= 1k ohm audio
>>
>> probably not critical, but, I use linear.
>>
>> >HP}
>> >LP } inputs 100k ohm linear each
>> >BP}
>>
>> >Level= What do you all suggest?
>>
>> 100k to 200k
>>
>> >Should I buy the 2.5mm or 3.5mm jacks if I have a
>> >Blacet/Frak-Rack system? They use 1/8 inch plugs.
>>
>> 3.5mm.
>>
>> >And is it difficult to add the "all pass" input even though it's
>a
>> >different circut then the Cyndustries version?
>>
>> Just plug the same signal into all three inputs at once using a
>multiple
>> jack. That's how the all pass was first done. Cynthia's just uses
>a bunch of
>> op-amp summers to give one extra jack.
>>
>> Ken
>>
>_____________________________________________________________________
>__
>> Ken Stone sasami@h... or sasami@c...
>> Modular Synth PCBs for sale
><http://www.blaze.net.au/~sasami/synth/>
>> Australian Miniature Horses & Ponies
><http://www.blaze.net.au/~sasami/>
>
>
>
>
>See the following URLS for the CGS Modular Synth home page:
>Main: http://www.cgs.synth.net/
>Secondary: http://otherunicorn.0catch.com/synth/
>Yahoo! Groups Links
>
>
>
>
>
>

_______________________________________________________________________
Ken Stone sasami@... or sasami@...
Modular Synth PCBs for sale <http://www.blaze.net.au/~sasami/synth/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>