Synth-DIY Yahoo! Groups Archives

Thread

Synthacon pot values?

2004-05-20 by earthtodylan2000

I'm getting closer to finishing my first cgs module. Bought the
faceplate today. Now jacks and pots.

Please correct me if I'm wrong.

Frequency=100k ohm audio

Resonance= 1k ohm audio

HP}
LP } inputs 100k ohm linear each
BP}

Level= What do you all suggest?

Should I buy the 2.5mm or 3.5mm jacks if I have a
Blacet/Frak-Rack system? They use 1/8 inch plugs.

And is it difficult to add the "all pass" input even though it's a
different circut then the Cyndustries version?

Thanks.

Re: Synthacon pot values?

2004-05-20 by sasami@hotkey.net.au

>Please correct me if I'm wrong.
>
>Frequency=100k ohm audio

Linear, not audio

>Resonance= 1k ohm audio

probably not critical, but, I use linear.

>HP}
>LP } inputs 100k ohm linear each
>BP}

>Level= What do you all suggest?

100k to 200k

>Should I buy the 2.5mm or 3.5mm jacks if I have a
>Blacet/Frak-Rack system? They use 1/8 inch plugs.

3.5mm.

>And is it difficult to add the "all pass" input even though it's a
>different circut then the Cyndustries version?

Just plug the same signal into all three inputs at once using a multiple
jack. That's how the all pass was first done. Cynthia's just uses a bunch of
op-amp summers to give one extra jack.

Ken
_______________________________________________________________________
Ken Stone sasami@... or sasami@...
Modular Synth PCBs for sale <http://www.blaze.net.au/~sasami/synth/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>

Re: Synthacon pot values?

2004-05-26 by thee_vaporizer

Regarding these potentiometers for HP/BP & LP, do they need to be
put in series with the 47k resistors ?

thx,
Steven

Show quoted textHide quoted text

--- In cgs_synth@yahoogroups.com, sasami@h... wrote:
>
> >Please correct me if I'm wrong.
> >
> >Frequency=100k ohm audio
>
> Linear, not audio
>
> >Resonance= 1k ohm audio
>
> probably not critical, but, I use linear.
>
> >HP}
> >LP } inputs 100k ohm linear each
> >BP}
>
> >Level= What do you all suggest?
>
> 100k to 200k
>
> >Should I buy the 2.5mm or 3.5mm jacks if I have a
> >Blacet/Frak-Rack system? They use 1/8 inch plugs.
>
> 3.5mm.
>
> >And is it difficult to add the "all pass" input even though it's
a
> >different circut then the Cyndustries version?
>
> Just plug the same signal into all three inputs at once using a
multiple
> jack. That's how the all pass was first done. Cynthia's just uses
a bunch of
> op-amp summers to give one extra jack.
>
> Ken
>
_____________________________________________________________________
__
> Ken Stone sasami@h... or sasami@c...
> Modular Synth PCBs for sale
<http://www.blaze.net.au/~sasami/synth/>
> Australian Miniature Horses & Ponies
<http://www.blaze.net.au/~sasami/>

Re: Synthacon pot values?

2004-05-26 by sasami@hotkey.net.au

Wire them as standard input attenuators.

signal in to CW end. Wiper to input of filter. CCW end to 0v/gnd

Ken

Show quoted textHide quoted text

>Regarding these potentiometers for HP/BP & LP, do they need to be
>put in series with the 47k resistors ?
>
>thx,
>Steven
>--- In cgs_synth@yahoogroups.com, sasami@h... wrote:
>>
>> >Please correct me if I'm wrong.
>> >
>> >Frequency=100k ohm audio
>>
>> Linear, not audio
>>
>> >Resonance= 1k ohm audio
>>
>> probably not critical, but, I use linear.
>>
>> >HP}
>> >LP } inputs 100k ohm linear each
>> >BP}
>>
>> >Level= What do you all suggest?
>>
>> 100k to 200k
>>
>> >Should I buy the 2.5mm or 3.5mm jacks if I have a
>> >Blacet/Frak-Rack system? They use 1/8 inch plugs.
>>
>> 3.5mm.
>>
>> >And is it difficult to add the "all pass" input even though it's
>a
>> >different circut then the Cyndustries version?
>>
>> Just plug the same signal into all three inputs at once using a
>multiple
>> jack. That's how the all pass was first done. Cynthia's just uses
>a bunch of
>> op-amp summers to give one extra jack.
>>
>> Ken
>>
>_____________________________________________________________________
>__
>> Ken Stone sasami@h... or sasami@c...
>> Modular Synth PCBs for sale
><http://www.blaze.net.au/~sasami/synth/>
>> Australian Miniature Horses & Ponies
><http://www.blaze.net.au/~sasami/>
>
>
>
>
>See the following URLS for the CGS Modular Synth home page:
>Main: http://www.cgs.synth.net/
>Secondary: http://otherunicorn.0catch.com/synth/
>Yahoo! Groups Links
>
>
>
>
>
>

_______________________________________________________________________
Ken Stone sasami@... or sasami@...
Modular Synth PCBs for sale <http://www.blaze.net.au/~sasami/synth/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>

Cgs synth

Synthacon pot values?

Synthacon pot values?

Re: Synthacon pot values?

Re: Synthacon pot values?

Re: Synthacon pot values?

Move to quarantaine