Hi,
Both my MIDI-CV and PolyDAC(X) MIDI Converters require a stabilised +/-15V
DC supply. Ken's CGS14 will work fine with these boards. Similarly so will
my PSU-1.
Please note that both the CGS14 and PSU-1 require a transformer supply for
operation (typically 36VAC centre-tapped) although both units can also be
operated from a suitable DC power supply (nominally +/- 22VDC).
Best Regards
(Mr) Laurie Biddulph
Mobile: 0400 257 645
Elby Designs
ABN: 70 022 727 605
http://www.elby-designs.com
This e-mail and any files transmitted with it are confidential and intended
for the addressee only.
If you are not the addressee you may not copy, forward, disclose or
otherwise use it, or any part
of it, in any form whatsoever. If you have received this e-mail in error
please notify the sender
and ensure that all copies of this e-mail and any files transmitted with it
are deleted. Any views
or opinions represented in this e-mail are solely those of the author and do
not necessarily
represent those of Elby Designs. Although this e-mail and its attachments
have been scanned for the
presence of computer viruses, Elby Designs will not be liable for any losses
as a result of any
viruses being passed on.
----- Original Message -----
Show quoted textHide quoted text
From: "Future Image" <futureimage@...>
To: <cgs_synth@yahoogroups.com>
Sent: Saturday, August 19, 2006 7:58 PM
Subject: [cgs_synth] Re: UK Power Supply?
> Ok, just looking at your MIDI-CV converter, will I need the PSU-2 for
> that to supply 15V or does the PCB already have a regulator on there?
> I'd like to have the MIDI-CV as an "external" module so I can take it
> anywhere to use with any analog synth.
>
> --- In cgs_synth@yahoogroups.com, "Laurie Biddulph" <elby_designs@...>
> wrote:
>>
>> Hi,
>>
>> Ken's CGS14 is a common low-cost power supply and will happily run
> the modules listed.
>> If you want to go for a slightly larger unit that will support an
> extensive number of additional modules and uses a higher quality
> circuit then you should look at my PSU-2
> (http://www.elby-design.com/power/psu2-about.htm).
>>
>> Best Regards
>>
>> (Mr) Laurie Biddulph
>> Mobile: 0400 257 645
>>
>> Elby Designs
>> ABN: 70 022 727 605
>> http://www.elby-designs.com
>>
>> This e-mail and any files transmitted with it are confidential and
> intended for the addressee only.
>> If you are not the addressee you may not copy, forward, disclose or
> otherwise use it, or any part
>> of it, in any form whatsoever. If you have received this e-mail in
> error please notify the sender
>> and ensure that all copies of this e-mail and any files transmitted
> with it are deleted. Any views
>> or opinions represented in this e-mail are solely those of the
> author and do not necessarily
>> represent those of Elby Designs. Although this e-mail and its
> attachments have been scanned for the
>> presence of computer viruses, Elby Designs will not be liable for
> any losses as a result of any
>> viruses being passed on.
>>
>> ----- Original Message -----
>> From: Future Image
>> To: cgs_synth@yahoogroups.com
>> Sent: Sunday, June 25, 2006 7:34 PM
>> Subject: [cgs_synth] UK Power Supply?
>>
>>
>> Hi,
>> I'm very interested in building the modular kits that Elby Designs
>> supplies, but how will I power them up here in the UK? Can I use the
>> CGS14 15V power supply to power must of the important modules (VCO,
>> VCF, VCA, LFO, Envelope, etc.)?
>>
>>
>>
>>
>>
>>
>>
>> The CGS Modular Synth home page: http://www.cgs.synth.net/
>>
>> Yahoo! Groups Links
>>
>>
>>
>>
>>
>>
>>
>>
>> [Non-text portions of this message have been removed]
>>
>
>
>
>
>
>
> The CGS Modular Synth home page: http://www.cgs.synth.net/
>
> Yahoo! Groups Links
>
>
>
>
>
>