Cgs synth

>I just finished the Programmer Sequencer (8 Steps) except the
>pushbuttons which I will be doing tonight, everything worked except
>the CPO jack..
>
>Ken what exactly does this out do..
>
>Data2action mentioned his CPO was not working either, did you get
>this debugged?????
>
>I built it to MOTM standard, yes wiring all the pots was a huge pain
>and I am glad it's over, I will post pics soon...
>
>Ken this is an amazing module, thank you very much for this... can't
>wait for the Gate Delay..
>
>[Non-text portions of this message have been removed]
>
>
>
>The CGS Modular Synth home page: http://www.cgs.synth.net/
>
>Yahoo! Groups Links
>
>
>

From: sasami@...
To: cgs_synth@yahoogroups.com
Sent: Monday, October 16, 2006 9:10 PM
Subject: Re: [cgs_synth] Programmer Sequencer built + Question



>is the gate delay a new module? or are you using the existing gated
>comparator / analogue shift / etc modules?

entirely new, based on obsolete but easy to get ram chips, making it a HUGE
shift register with 8 equally spaced taps, or 8 smaller shift registers.
Powered by a 1V/oct clock.

>what *is* ken doing next? :-)

Going quietly insane, I think.

Actually, it's an envelope generator that is currently in the works. Yay,
about @#$% time.

Ken

>
>
>>I just finished the Programmer Sequencer (8 Steps) except the
>>pushbuttons which I will be doing tonight, everything worked except
>>the CPO jack..
>>
>>Ken what exactly does this out do..
>>
>>Data2action mentioned his CPO was not working either, did you get
>>this debugged?????
>>
>>I built it to MOTM standard, yes wiring all the pots was a huge pain
>>and I am glad it's over, I will post pics soon...
>>
>>Ken this is an amazing module, thank you very much for this... can't
>>wait for the Gate Delay..
>>
>>[Non-text portions of this message have been removed]
>>
>>
>>
>>The CGS Modular Synth home page: http://www.cgs.synth.net/
>>
>>Yahoo! Groups Links
>>
>>
>>
>
>
>
>The CGS Modular Synth home page: http://www.cgs.synth.net/
>
>Yahoo! Groups Links
>
>
>
>
>
__________________________________________________________
Ken Stone sasami@...
Modular Synth PCBs for sale <http://www.blaze.net.au/~sasami/synth/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>





[Non-text portions of this message have been removed]

From: sasami@...
To: cgs_synth@yahoogroups.com
Sent: Monday, October 16, 2006 9:06 PM
Subject: Re: [cgs_synth] Programmer Sequencer built + Question


>I just finished the Programmer Sequencer (8 Steps) except the pushbuttons
which I will be doing tonight, everything worked except the CPO jack..
>
>Ken what exactly does this out do..

It gives a pulse when one of the pushbuttons are pressed. It is possbile I
have a bug, and no, I've had way too much on my plate of late to even think
about looking at it.

Ken
__________________________________________________________
Ken Stone sasami@...
Modular Synth PCBs for sale <http://www.blaze.net.au/~sasami/synth/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>





[Non-text portions of this message have been removed]

On Oct 16, 2006, at 7:56 PM, The Alison Project wrote:

> ahhhh thanks ken... i havent installed the pushbuttons yet so i may
> be fine.... i will post to the group later tonight
>
> ----- Original Message -----
> From: sasami@...
> To: cgs_synth@yahoogroups.com
> Sent: Monday, October 16, 2006 9:06 PM
> Subject: Re: [cgs_synth] Programmer Sequencer built + Question
>
> >I just finished the Programmer Sequencer (8 Steps) except the
> pushbuttons
> which I will be doing tonight, everything worked except the CPO jack..
> >
> >Ken what exactly does this out do..
>
> It gives a pulse when one of the pushbuttons are pressed. It is
> possbile I
> have a bug, and no, I've had way too much on my plate of late to
> even think
> about looking at it.
>
> Ken
> __________________________________________________________
> Ken Stone sasami@...
> Modular Synth PCBs for sale <http://www.blaze.net.au/~sasami/synth/>
> Australian Miniature Horses & Ponies <http://www.blaze.net.au/
> ~sasami/>
>
> [Non-text portions of this message have been removed]
>
>
>

dave wright
www.notbreathing.com
bastardita@...





[Non-text portions of this message have been removed]

From: david wright
To: cgs_synth@yahoogroups.com
Sent: Monday, October 16, 2006 10:08 PM
Subject: Re: [cgs_synth] Programmer Sequencer built + Question


hey guys - your making me drool with all this talk. i have all my
boards sitting here.
i was wondering if anyone in the US knew a good part # and store that
would have
pots to fit the pcbs right? i dont wana wire each pot up sep :) i'm lazy

dave
ps - ken is the man! thanks again ken! you know why! stoked!

On Oct 16, 2006, at 7:56 PM, The Alison Project wrote:

> ahhhh thanks ken... i havent installed the pushbuttons yet so i may
> be fine.... i will post to the group later tonight
>
> ----- Original Message -----
> From: sasami@...
> To: cgs_synth@yahoogroups.com
> Sent: Monday, October 16, 2006 9:06 PM
> Subject: Re: [cgs_synth] Programmer Sequencer built + Question
>
> >I just finished the Programmer Sequencer (8 Steps) except the
> pushbuttons
> which I will be doing tonight, everything worked except the CPO jack..
> >
> >Ken what exactly does this out do..
>
> It gives a pulse when one of the pushbuttons are pressed. It is
> possbile I
> have a bug, and no, I've had way too much on my plate of late to
> even think
> about looking at it.
>
> Ken
> __________________________________________________________
> Ken Stone sasami@...
> Modular Synth PCBs for sale <http://www.blaze.net.au/~sasami/synth/>
> Australian Miniature Horses & Ponies <http://www.blaze.net.au/
> ~sasami/>
>
> [Non-text portions of this message have been removed]
>
>
>

dave wright
www.notbreathing.com
bastardita@...

[Non-text portions of this message have been removed]





[Non-text portions of this message have been removed]

On 10/17/06, The Alison Project <alison@...> wrote:
>
> I just finished the Programmer Sequencer (8 Steps) except the
> pushbuttons which I will be doing tonight, everything worked except the
> CPO jack..
>
> Ken what exactly does this out do..
>
> Data2action mentioned his CPO was not working either, did you get this
> debugged?????
>
> I built it to MOTM standard, yes wiring all the pots was a huge pain and I
> am glad it's over, I will post pics soon...
>
> Ken this is an amazing module, thank you very much for this... can't wait
> for the Gate Delay..
>
> [Non-text portions of this message have been removed]
>
>
>



--
Wasubot
----------------------------
Notes: Special Sequence Mixed For Dancing


[Non-text portions of this message have been removed]