Cgs synth

>What values of resistors have you found to be the most useable, for
>the 6 'voices' in the Cynare?
>I'll have mine hooked up completely before work tomorrow afternoon,
>but I thought I'd ask what others have found to be useful values. :)
>
>I'm going with a 100k pot, for each of the voices. (Only having 3 x
>2.2 megs, that I'm reserving for my next ADSR EG).
>The values I've chosen thus farly, for checking them out are:
>
>10k
>22k
>51k
>
>30k
>120k
>270k
>
>I figured, with the 100k pots, there would be some overlapping,
>handily enough. (From my experiences in building the Shimmer section
>ONLY in my modular)
>
>I'm wide open to other's advices though. :)
>
>ALso - additional advices as to values that would be more useable
>towards, Snare drums, or Hihats, as I'll definately be ordering at
>least 1 more Cynare. :D
>
>Thanks for any help. :)
>
>--
>Take care,
>Warmth and Peace,
>Ryk
>
>http://www.sdiy.org/damian/index.html - my modular synth's homepage :)
>
>
>The CGS Modular Synth home page: http://www.cgs.synth.net/
>
>Yahoo! Groups Links
>
>
>
>
>

>
> Use 1k resistors - this will give you 100 to 1 ratio across the sweep of
> the
> pots. Increase the 10n capacitors to 100n to bring the frequency back to
> something usable. Watch the 74C14 doesn't get too hot. It shouldn't get
> hot
> at all, but if it does, increase the 1k resistors to 2k2 or 3k3.
>
> Ken
>

On 10/20/06, sasami@... <sasami@...> wrote:
>
> Use 1k resistors - this will give you 100 to 1 ratio across the sweep of
> the
> pots. Increase the 10n capacitors to 100n to bring the frequency back to
> something usable. Watch the 74C14 doesn't get too hot. It shouldn't get
> hot
> at all, but if it does, increase the 1k resistors to 2k2 or 3k3.
>
> Ken
>
>
>









K. With the Poly caps that I have available, and considering your
temperature concerns for my CD40106 - I've gone with 0.047uF (47nF) as I
don't have any non-ceramic 0.1uFs with 2200r resistors.

With Frequency = 1/(R*C) that gives me about 206hz to 9600hz of range. That
should be sufficient with my ear's range to get an idea - no?
Working with this - I'll be heading back to changing the resistor /
capacitor values in my Shimmer module in my modular as well - if I did my
math above, correctly. ;)

(1 / (2200r * 0.000000047F) to 1 / (102200r * 0.000000047F))

--
Take care,
Warmth and Peace,
Ryk

http://www.sdiy.org/damian/index.html - my modular synth's homepage :)


[Non-text portions of this message have been removed]